Ashapura Automobiles

Impact sockets Chrome-molybdenum Steel and Phosphate manganese surface finish for extreme wear resistance, easy to read laser etched marking with output size, and model number. Impact sockets are designed to be used with impact and ratchet wrenches in high speed, high torque applications. Structurally, sockets are built to be soft and ductile so that they can easily deform and reform due to the immense stress exerted by the hammering action of an impact wrench. Designed with a cross hole in the handle end, compatible with a retaining pin and ring, or locking pin anvil.

This series of ultralight, ergonomic impact wrenches, designed with a durable twin hammer clutch mechanism is highly recommended. The advantages of pneumatic technology are reinforced by the lightweight composite body design and an aluminium clutch housing for long-term use. Bolt mounting and removal is facilitated by ergonomic options such as an integrated bail and rubber grip handle. The CP82 series is available in 9 models with pin or ring dual socket retainer for a maximum reverse torque from 450 up to 1,650 Nm (332 up to 1217 ft.lb). The range extends from 3/8" to 3/4".

Design & FunctionsExhaustRearSpindle lockNoStarting systemSafety leverRotative inletNoGovernor typeNACollet max capacity1/4 (6.4mm)Size & WeightMin hose diam (5 m hose length)10 mmMin hose diam (16 ft hose length)0.38 inWeight0.57 kgLength (L)146 mm

cordless impact wrench- battery tools RC9067K2

For operators working in general maintenance and especially in tight spaces who are looking for a compact tool, CP876 series is the die grinder that you need.          

The CP876 series is designed for general maintenance in limited spaces applications. It has an integrated pneumatic regulator with a power of 0.3 hp (220 W). It is a very compact and lightweight tool, ensuring extreme maneuverability in high-speed grinding applications

The CP9113G Series, a 1/4' (6.35 mm) capacity die grinder with collet is an industrial maintenance and production tool for grinding, contouring, deburring, and cleaning applications. It delivers a powerful governed motor of 1 hp (750 W) and a free speed up to 25,000 rpm. Available in straight or extended housing collet spindle.

1" D-HANDLE PNEUMATIC IMPACT WRENCH                                                            .

Design & FunctionsExhaustRearSpindle lockNoStarting systemSafety leverRotative inletNoGovernor typeNACollet max capacity1/4 (6.4mm)Size & WeightMin hose diam (5 m hose length)10 mmMin hose diam (16 ft hose length)0.38 inWeight0.57 kgLength (L)165 mmSpeedFree Speed27000 rpmAir consumption at free speed12 l/sMaterialMain Material typeAluminum, Composite over-sleevePower & BatteryMax power470 WNoise & vibrationsSound Power (dba)-Sound Pressure100.9 dB(A)Vibration (m/s²)<2.5Tightening StrategiesAngle TypeStraightAir informationMax dynamic air working pressure6.3 barAir consumption at load12 l/sAir inlet thread size (in)1/4

1/8" X19 - PNEUMATIC NEEDLE SCALER AND 1.37" (35 mm) CHIPPING HAMMER

Designed for body shops or general maintenance applications such as trailer panels, number plates, and any type of panels maintenance, the CP9882 series offers ease of use and reliability. This pneumatic riveter can be used with aluminum, copper and softer materials rivets with a maximum capacity of 3/16" (4.8 mm).Country of origin is TW

Designed for body shop applications like paint removal, smoothing and rust removal in limited space applications, this 3/8" (10mm) and 3/4" (20 mm) belt sander series offers high accessibility and high efficiencyCountry of origin is TW.

The CP6500 1/2" impact wrench is a safe bet. With its powerful oil bath twin hammer clutch mechanism, aluminium body, and steel clutch housing, it is a perfect bolting tool for tough environments. It delivers max reverse torque up to 850 Nm /625 ft.lb. The oil bath clutch mechanism guarantees a low level of friction, which increases clutch component lifespan. The CP6500 Series includes 2 models: RS : ring socket retainer and PSR : pin socket retainer.Country of origin is JP

The "Classic" reference in the 1/2" impact wrench range, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.Country of origin is JP

The CP875 series is designed for general maintenance in limited spaces. It has an integrated pneumatic regulator with a power of 0.3 hp (220 W). It is a very compact and lightweight tool, ensuring extreme maneuverability in high-speed grinding applications. Available as a bare tool or as a kit.Country of origin is TW

Designed for body shops applications like surface preparation, this 5" orbital sander (3/16" - 5mm orbit) series offers efficiency with its power of 0.3 hp (210 W) and great ergonomics with its palm shape in soft grip. This model belongs to the CP351X series which is composed of 6 models: 2x Non Vacuum (NV) model (Hook & Loop and PSA pad), 2x Self Vacuum (SV) model (Hook & Loop and PSA pad) and 2x Central Vacuum (CV) model (Hook & Loop and PSA pad)Country of origin is TW

5"(125 mm) PNEUMATIC ANGLE GRINDER                                                                     .

6 METER HOSE